ISO 105 E04 BS 1006 DIN 54005 Sweat Staining Color Fastness Testing Machine Textile Colour Fastness Tester
Introduction
The sweat staining color fastness tester is widely used to test the color fastness of textiles to sweat, seawater, saliva, distilled water, etc. The sample is combined with the specified backing fabric, treated with the test solution, the test solution is removed and placed in the middle of the test sample plate, and then pressure is applied under the specified pressure for a certain period of time. After drying the sample and the backing fabric separately, the color change is observed. The stainless steel sample holder can accommodate 20 samples and is equipped with acrylonitrile partition plates. It also provides standard weights such as AATCC, ISO, and BS. It is also compatible with the sweat color fastness oven and the chemical reagent kits suitable for AATCC and ISO sweat tests, including 500g sodium chloride, 500g disodium hydrogen phosphate, 500g sodium hydrogen phosphate, and 200g L-histidine salt.
Meet with the standards
ISO 105 E01 E02 E04,BS 1006,AATCC 15 106 107,DIN 54005,M&S C6 C7,NEXT TM4,DIN EN ISO 105 E01 E02 E04,GB/T 3992 5713 5714
Scope of application
Tests and determinations of sweat resistance color fastness for various textile materials and textiles, as well as the performance of various colored and dyed textiles in terms of color fastness to sweat, seawater, saliva, distilled water, etc.
Technical Specification
|
Equipment Configuration
|
This instrument is equipped with 1 stainless steel sample holder, 2 standard weights, and 21 acrylonitrile plates.
|
|
Sample Holder Capacity
|
The sample holder can accommodate 20 samples, each measuring 10cm by 4cm.
|
|
Sample Material
|
Each sample is made of acrylonitrile board.
|
|
Weight Function
|
Using different weights will result in different test standards, thus avoiding the use of incorrect weights.
|
|
|
ISO 105 E04 BS 1006 DIN 54005 Sweat Staining Color Fastness Testing Machine Textile Colour Fastness Tester Images
|
